3. Try The Zip Tie Or Drain Snake Hack For Early Hair Buildup
If removing the stopper didn’t solve the problem, the next step is to try using a zip tie or a small drain snake to remove any hair buildup that’s deeper in the drain. A zip tie can be transformed into a makeshift tool by cutting small notches into it, creating hooks that can snag hair clogs.
Gently insert the zip tie or drain snake into the drain, twisting and pulling up to catch and remove any debris. This method is effective for catching hair that the stopper missed and can often clear minor blockages without needing to disassemble the plumbing.
4. Flush With Boiling Water To Melt Soap Scum And Grease
Boiling water can be a surprisingly effective solution for clearing minor clogs caused by soap scum and grease buildup. Boil about a gallon of water and carefully pour it down the drain in stages, allowing each portion to work its way through the clog.
This method works best if the pipes are metal, as boiling water can damage PVC pipes or loosen their joints. Always check your plumbing material before proceeding. If effective, you should notice an improvement in the drainage speed as the hot water melts away the clogs.
5. Use A Baking Soda And Vinegar Fizz Instead Of Harsh Chemicals
A natural and eco-friendly alternative to chemical drain cleaners is the classic baking soda and vinegar combination. Start by pouring about half a cup of baking soda down the drain, followed by a cup of white vinegar. The chemical reaction between these two substances causes fizzing, which can help dislodge clogs.
Let the mixture sit for about 15-30 minutes, then flush the drain with hot water to help wash away the loosened debris. This method is effective for minor clogs and is safe for most types of plumbing.
6. Deploy A Wet/Dry Vacuum To Suck Out Hidden Clogs
If manual methods haven’t worked, try using a wet/dry vacuum to suck out the clog. First, set the vacuum to the liquid setting and create a tight seal around the drain with a wet cloth or duct tape. Turn the vacuum on to suck out the clog from the drain.
This technique can be surprisingly effective for removing stubborn clogs that are beyond the reach of a drain snake or zip tie, especially if the clog is composed of small, loose particles.
7. Plunge The Sink Properly Without Splashing Disaster
A plunger can be a powerful tool for unclogging a sink, but it’s crucial to use it correctly to avoid making a mess. First, ensure the sink has enough water to cover the plunger’s suction cup. Then, block any overflow openings with a wet cloth to create a seal.
Position the plunger over the drain and give it several firm, quick plunges. The pressure created can often dislodge stubborn clogs. Once finished, run water to check if the drainage has improved. Repeat as necessary.
For Complete Cooking STEPS Please Head On Over To Next Page Or Open button (>) and don’t forget to SHARE with your Facebook friends
